危廢暫存間怎么建？這份標準清單+建設指南請收好！

　　How to build a hazardous waste storage room? Please keep this standard checklist and construction guide safe!

　　危險廢物的規范化管理是企業環保工作的重中之重，而貯存設施的建設更是基礎中的基礎。無論是新建、改建還是擴建危廢貯存間，必須嚴格遵守國家相關標準規范。今天，我們整理了危廢貯存相關的核心文件及詳細建設要求，建議收藏備用！

　　The standardized management of hazardous waste is of paramount importance in the environmental protection work of enterprises, and the construction of storage facilities is even more fundamental. Whether it is the construction, renovation, or expansion of hazardous waste storage facilities, it is necessary to strictly comply with relevant national standards and regulations. Today, we have compiled the core documents and detailed construction requirements related to hazardous waste storage. It is recommended to keep them for future use!

　　01核心文件速覽在開始建設前，首先需要熟悉以下國家標準和技術規范：

　　Before starting construction, it is necessary to familiarize oneself with the following national standards and technical specifications:

　　建設標準《危險廢物貯存污染控制標準》GB18597-2023

　　Construction standard "Pollution Control Standard for Hazardous Waste Storage" GB18597-2023

　　標識規范《危險廢物識別標志設置技術規范》HJ12762022

　　Identification Specification for Hazardous Waste Identification Signs HJ12762022

　　技術規范《危險廢物收集貯存運輸技術規范》HJ2025-2012

　　Technical Specification for Collection, Storage, and Transportation of Hazardous Waste HJ2025-2012

　　評價指南《建設項目危險廢物環境影響評價指南》

　　Evaluation Guidelines for Environmental Impact Assessment of Hazardous Waste in Construction Projects

　　02總體建設要求（7大要點）1 污染防治措施必須到位貯存設施應根據危險廢物的形態、物理化學性質、包裝形式和污染物遷移途徑，采取必要的： 防風、防曬、防雨 防漏、防滲、防腐 其他環境污染防治措施 重要提醒：嚴禁露天堆放危險廢物！

　　02 Overall construction requirements (7 key points) 1. Pollution prevention and control measures must be in place. Storage facilities should adopt necessary environmental pollution prevention and control measures based on the form, physical and chemical properties, packaging form, and pollutant migration path of hazardous waste, including windproof, sun proof, rain proof, leak proof, anti-seepage, and anti-corrosion. Important reminder: It is strictly prohibited to stack hazardous waste outdoors!

　　2 分區存放，不相容廢物嚴格隔離根據危險廢物的類別、數量、形態、物理化學性質等設置合理的貯存分區不相容（相互反應）的危險廢物必須分開存放設置不滲透隔擋墻間隔：擋墻高度不低于墻面裙角廢物堆疊高度不超過擋墻高度目的：避免不相容廢物接觸、混合引發安全事故

　　2-zone storage, strict isolation of incompatible waste. Reasonable storage zones should be set according to the category, quantity, form, physical and chemical properties of hazardous waste. Incompatible (reactive) hazardous waste must be stored separately with impermeable barriers. The barrier height should not be lower than the wall skirt corner, and the stacking height of waste should not exceed the barrier height. The purpose is to avoid contact and mixing of incompatible waste, which may cause safety accidents

　　3 建筑材料要求嚴格貯存設施或貯存分區內的以下部位必須采用堅固材料建造，表面無裂縫：地面墻面裙腳堵截泄漏的圍堰接觸危險廢物的隔板和墻體

　　3. Strict requirements for building materials: The following parts within the storage facilities or storage zones must be constructed with sturdy materials and have no cracks on the surface: the ground, walls, skirts, and feet that block leaks, cofferdams that come into contact with hazardous waste partitions and walls

　　4 防滲要求分級明確表面防滲：地面與裙腳應采取表面防滲措施防滲材料應與所接觸的物料或污染物相容可選材料：抗?jié)B混凝土、高密度聚乙烯膜、鈉基膨潤土防水毯或其他等效材料

　　4. Classification of anti-seepage requirements: Surface anti-seepage measures should be taken for the ground and skirt feet. The anti-seepage materials should be compatible with the materials or pollutants in contact. Optional materials include anti-seepage concrete, high-density polyethylene film, sodium based bentonite waterproof blanket, or other equivalent materials

　　基礎防滲（危險廢物直接接觸地面時）：防滲層為至少1米厚黏土層（滲透系數≤10 cm/s）或至少2mm厚高密度聚乙烯膜等人工防滲材料（滲透系數≤10 cm/s）或其他防滲性能等效的材料

　　Basic anti-seepage (when hazardous waste comes into direct contact with the ground): The anti-seepage layer is at least 1 meter thick clay layer (permeability coefficient ≤ 10 cm/s) or artificial anti-seepage materials such as at least 2mm thick high-density polyethylene film (permeability coefficient ≤ 10 cm/s) or other materials with equivalent anti-seepage performance

　　重點檢查：地面防滲漏層不得存在破損或開裂！

　　Key inspection: The ground anti-seepage layer must not have any damage or cracking!

　　5 防滲防腐工藝一致性要求同一貯存設施宜采用相同的防滲、防腐工藝防滲、防腐材料應覆蓋所有可能與廢物及其滲濾液、滲漏液等接觸的構筑物表面采用不同工藝的，應分別建設貯存分區

　　5. Consistency requirements for anti-seepage and anti-corrosion processes: The same storage facility should use the same anti-seepage and anti-corrosion process. The anti-seepage and anti-corrosion materials should cover all surfaces of structures that may come into contact with waste, leachate, and other liquids. If different processes are used, storage zones should be constructed separately

　　6 標識標牌規范設置危險廢物貯存設施門上必須張貼：規范的危險廢物警示標識周知卡（含廢物名稱、數量、特性、應急措施等信息）

　　6. Standard hazardous waste storage facility doors must be posted with standardized hazardous waste warning signs and information cards (including waste name, quantity, characteristics, emergency measures, etc.)

　　7 排水系統特殊要求不得連接市政雨污水管網貯存設施內清理出來的泄漏物→按危險廢物處理沖洗廢水→必須納入企業廢水處理設施，經處理達標后方可排放

　　7. Special requirements for drainage system: Do not connect to municipal rainwater and sewage pipeline storage facilities. Leaks cleared from the storage facilities must be treated as hazardous waste and flushed. The wastewater must be included in the enterprise's wastewater treatment facilities and can only be discharged after being treated to meet standards

　　03貯存庫建設要求（5大細化標準）1 分區隔離措施貯存庫內不同貯存分區之間應采取隔離措施，可采用：過道隔板隔墻要求：接觸危險廢物的隔板和墻體等應采用堅固材料建造，表面無裂縫

　　03 Storage Warehouse Construction Requirements (5 Detailed Standards) 1. Partition Isolation Measures: Isolation measures should be taken between different storage zones in the storage warehouse, which can include: aisle partition walls. Requirements for partition walls: partitions and walls that come into contact with hazardous waste should be constructed with sturdy materials and have no cracks on the surface

　　2 液體廢物貯存要求（關鍵！）設置導流槽及收集池：適用于：貯存液態危險廢物，或通過貯存分區方式貯存液態廢物收集池最小容積 ≥二者取較大值：對應貯存區域最大液態廢物容器容積液態廢物總儲量的1/10

　　2. Storage requirements for liquid waste (key!): Install diversion channels and collection tanks: suitable for storing liquid hazardous waste, or storing liquid waste through storage zoning. The minimum volume of the collection tank is ≥ the larger of the two: 1/10 of the total liquid waste storage capacity corresponding to the maximum liquid waste container volume in the storage area

　　滲濾液收集設施：適用于：貯存可能產生滲濾液的危險廢物要求：收集設施容積應滿足滲濾液收集需要

　　Leachate collection facility: Suitable for storing hazardous waste that may produce leachate. Requirements: The volume of the collection facility should meet the needs of leachate collection

　　3 廢氣收集處理要求適用情形：貯存易產生以下污染物的危險廢物：粉塵VOCs（揮發性有機物）酸霧有毒有害大氣污染物刺激性氣味氣體

　　3. Requirements for exhaust gas collection and treatment Applicable situations: Storage of hazardous waste that is prone to produce the following pollutants: dust, VOCs (volatile organic compounds), acid mist, toxic and harmful air pollutants, irritating odor gases

　　設施要求：設置氣體收集裝置設置氣體凈化設施排氣筒高度應符合環評要求需有廢氣監測報告

　　Facility requirements: Install gas collection devices and gas purification facilities. The height of the exhaust pipe should comply with environmental impact assessment requirements and require a waste gas monitoring report

　　4 易燃易爆廢物貯存要求貯存易燃易爆危險廢物的貯存庫應配置：有機氣體報警裝置火災報警裝置靜電接地裝置

　　Storage requirements for flammable and explosive waste: Storage facilities for flammable and explosive hazardous waste should be equipped with organic gas alarm devices, fire alarm devices, and electrostatic grounding devices

　　5 廢棄?；?劇毒品貯存要求特殊管理措施：設置防盜措施雙鑰匙封閉式管理專人24小時看管

　　5. Storage Requirements for Waste Hazardous Chemicals/Highly Toxic Chemicals Special Management Measures: Set up anti-theft measures Double key enclosed management with dedicated personnel for 24-hour supervision

　　04其他設施建設要求 貯存場（半開放式）具有頂棚的半開放式貯存設施設置液體導流和收集設施防止危險廢物揚散、流失設置徑流疏導系統，防止雨水沖淋

　　04 Other facility construction requirements: Storage site (semi open) with a roof. Semi open storage facilities with a roof should be equipped with liquid diversion and collection facilities to prevent the dispersion and loss of hazardous waste. A runoff diversion system should be set up to prevent rainwater from washing over

　　貯存池防滲層覆蓋整個池體位于室內或具有頂棚（蓋）采取措施防止雨水、地表徑流等流入采取措施減少大氣污染物的無組織排放

　　The anti-seepage layer of the storage tank covers the entire tank body, which is located indoors or has a ceiling (cover). Measures are taken to prevent rainwater, surface runoff, etc. from flowing in, and measures are taken to reduce the unorganized discharge of atmospheric pollutants

　　貯存罐區設置在圍堰內，且容積滿足要求落實防滲、防腐措施及時處理收集的廢液、廢水和初期雨水

　　The storage tank area is set up inside the cofferdam, and the volume meets the requirements. Anti leakage and anti-corrosion measures are implemented to timely treat the collected waste liquid, wastewater, and initial rainwater

　　05危險廢物識別標志制度要求識別標志的設置涉及多個方面，具體應嚴格執行 《危險廢物識別標志設置技術規范》（HJ 1276—2022）：

　　The 05 Hazardous Waste Identification Mark System requires the setting of identification marks to involve multiple aspects, which should be strictly implemented in accordance with the Technical Specifications for the Setting of Hazardous Waste Identification Marks (HJ 1276-2022):

　　標簽標志示例：

　　Example of label symbol:

　　危險特性：腐蝕性（C）、毒性（T）、易燃性（I）、反應性（R）、感染性（In）。06附著式危險廢物貯存分區標志設置示意圖07危險廢物貯存分區標志08危廢貯存相關文件標準：危險廢物貯存間的建設標準執行----《危險廢物貯存污染控制標準》（GB18597-2023）。

　　Hazardous characteristics: corrosive (C), toxic (T), flammable (I), reactive (R), infectious (In). 06 Schematic diagram for setting zoning signs for attached hazardous waste storage 07 Hazardous waste storage zoning signs 08 Hazardous waste storage related document standards: Construction standards for hazardous waste storage rooms shall be implemented in accordance with the "Pollution Control Standards for Hazardous Waste Storage" (GB18597-2023).

　　規范：危廢標志的規范-----《危險廢物識別標志設置技術規范》（HJ 1276—2022）；危廢收集、貯存涉及的規范-----《危險廢物收集貯存運輸技術規范》（HJ2025-2012）。

　　Specification: Specification for Hazardous Waste Identification Signs - Technical Specification for Setting Hazardous Waste Identification Signs (HJ 1276-2022); The regulations involved in the collection, storage, and transportation of hazardous waste - Technical Specifications for the Collection, Storage, and Transportation of Hazardous Waste (HJ2025-2012).

　　指南：涉及危險廢物的環評內容評價指南-----《建設項目危險廢物環境影響評價指南》。09危險廢物貯存、利用、處置設施標志

　　Guidelines: Guidelines for Environmental Impact Assessment of Hazardous Waste in Construction Projects - "Guidelines for Environmental Impact Assessment of Hazardous Waste in Construction Projects". 09 Signs for hazardous waste storage, utilization, and disposal facilities

　　10實用提醒及時關注標準更新：GB18597-2023是最新版本，替代了舊版標準，建設時務必采用最新版本因地制宜：以上為通用要求，具體建設時還需結合企業實際產生的危廢特性、數量、當?shù)丨h(huán)保部門具體要求進行設計驗收把關：建設完成后，需經環保驗收合格方可投入使用日常維護：定期檢查防滲層、收集池、廢氣處理設施等是否完好，確保設施長期有效運行人員培訓：操作人員應熟悉危廢特性、應急處理措施，掌握設施操作方法】

　　10 practical reminders to pay attention to standard updates in a timely manner: GB18597-2023 is the latest version, replacing the old version of the standard. During construction, it is necessary to adopt the latest version according to local conditions. The above are general requirements, and specific construction needs to be based on the characteristics and quantity of hazardous waste generated by the enterprise, as well as the specific requirements of the local environmental protection department for design acceptance. After the construction is completed, it must pass the environmental protection acceptance before it can be put into use. Daily maintenance: Regularly check whether the anti-seepage layer, collection tank, exhaust gas treatment facilities, etc. are in good condition to ensure long-term effective operation of the facilities. Personnel training: Operators should be familiar with the characteristics of hazardous waste, emergency treatment measures, and master the operation methods of the facilities

　　本文由 危廢暫存間 友情奉獻.更多有關的知識請點擊 http://m.dgfsdt.com/ 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the hazardous waste storage room For more related knowledge, please click http://m.dgfsdt.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.